Charging | Starter | Ignition | Lighting | Chassis | Good Stuff | Order | Links | Shop

Beacon LED Tail Lights. Day or Night, you will be seen. Simple install. Why wait?

Rugged PC board mounts on precision stainless brackets and machined aluminum posts that hold everything securely to the original tail light base, and the whole works is heavily coated in polyurethane. Extreme vibration resistance means no more regularly replacing the bulb in a big Single. Installation is as easy as removing the 2 lens screws, removing the original incandescent bulb, and plugging in the Beacon. Back on with the lens, you're done.

Beacon tail lights are simply the brightest, best quality lights available that won't tax the bike's charging system and will greatly enhance your visibility. BE SEEN, NOT HURT!

NOTE: The Lenses shown are for reference ONLY; no lens are included.


Beacon Airhead Tail Light NEW! $49.95

1981 through 1995 R80G/S, R100GS, and R80ST



Beacon 1 $59.95

1970-78 Airhead models that have ONE bulb.


Beacon 2 $59.95

1979 through 1995 model Airheads except R80GS and R100GS.


R1100GS w/ABS $84.95

R1100GS No ABS $50.00! Smoking good deal.



Tail light lens for R80G/S, R100GS, and R80ST $59.95

These lenses are the perfect cure for a cracked, broken or dingy -looking original. NLA BMW



R1200GS & F650 $84.95 (not for F650CS)

Compatible with all brake systems, conventional, ABS and EVO boosted.


Spare 12 volt Bulbs

Headlight Bulbs vari

Bulbs for just about every possible need-headlight, tail light, turn signals and instruments. Halogen park light bulbs and heavy-duty, vibration resistant H-4 headlight bulbs are great improvements. New H4 "Super White" Xenon Gas too. You want light, we got light ;)

Headlight Lense Protectors

Save your high dollar headlight! Bonds cracked lenses. Permanetly installed; non-removable. Impact resistant 3M vinyl is optically clear and is invisible once installed. UV stablized, 4 year guarantee against deterioration from sun, salt, and harsh chemicals. Meets all D.O.T requirements.



"Stopper" LED License Plate Mounted Additional Brake Lighting $25

Resistor for dual-mode tail and brake light function, $8.00

This nifty accessory mounts a row of brilliant red LEDs right on the bottom of your license plate (or any flat, vertical surface) for greatly increased visibility from behind, and safely provides a redundant light in case the original fails . It mounts to the bottom two holes of almost all motorcycle license plates used in the USA, with some nice , new stainless hardware that's included.



Custom Reflective Tape

Extra visibility with no electrical penalty! Pre-cut kits apply 3M Scotchbrite reflective film to the back surfaces or side contours of your saddlebags or top trunk. Black material is invisible by day and turns brillaint white when light hits it at night. The kits are available for every type saddlebag and top trunk sold by BMW from F650 top cases to Cruiser bags too. Even Krauser is covered. One of the best safety enhancements available.


Kisan Tech Self Canceling Signal Minders

Keep riding down the road with blink, blink, blink? Signal Minders make sure your signals cancel after use. Selectable beeper notifies you if you desire. As reviewed in BMW MOA News.Tailblazer bulb has a bright replacable Halogen bulb with microprocessor controled flash rate. Keep tailgaters at bay. Full technical details available at



Spare Bulb Kit $25.00

Contains one each headlight, tail light , turn signal , and instument bulbs, and 2 fuses.

Blbkt-bxr For /6 and later boxers

Blbkt-K For K's and 4 valve boxers


Charging | Starter | Ignition | Lighting | Chassis | Good Stuff | Order | Links | Shop